Subpart MM - Aggregate Products
Breadcrumbs
Changed
Last updated: 1 month ago
This page provides an overview of the "Aggregate Products" tab on the Subpart MM reporting form.
Please see Reporting Form Instructions for instructions on downloading the blank reporting form and uploading the completed reporting form. The Aggregate Products tab is applicable to refineries, importers, and exporters.
Complete one row for each product entering or leaving the facility:
The following table provides instructions for reporting each data element in the Aggregate Products tab:
| Data Element | Instructions |
|---|---|
| Is the product entering the facility or leaving the facility? | For refineries, select "In" if the product is entering the refinery or "Out" if the product is leaving the refinery. For importer/exporter facilities, select "Import" if the product is being imported or "Export" if the product is being exported. |
| Product Name Code | Select the Product Name Code corresponding to products listed on Table MM-1 and Table MM-2. (Refer to tab "Tables MM-1 and MM-2", a link to this tab is provided above the column header). |
| Measured Quantity Units | Select unit of measure for the Product Annual Quantity: barrels (BBL) or metric tons (MT) |
| Product Annual Quantity | Enter the quantity of the product in the units specified. This quantity should include any quantities reported in Table 2 - Components of Blended Products on the "Blended Products" tab that have the same product name reported in this tab. |
| Percent Petroleum Based | Enter the percent of the product that is petroleum based. For example, enter '0' for biomass feedstock and enter '100' for products that were not produced by blending a petroleum-based product with a biomass feedstock. |
| Annual CO2 Quantity, (MT) | Enter annual CO2 emissions in metric tons (MT) that would result from complete combustion or oxidation of the product. This quantity should NOT include CO2 emissions resulting from individual components reported on the "Blended Products" tab. |
| Is Calculation Method 2 Used for this Product? | Select 'Yes' if Calculation Method 2 is used to determine the emission factor for this product; Select 'No' if Calculation Method 2 is not used. |
| Number of Samples | If Calculation Method 2 is used, enter number of samples collected according to 98.394(c). |
| Sampling Standard Method Used | If Calculation Method 2 is used, enter sampling standard method used. |
| Carbon Share (mass %) | If Calculation Method 2 is used, enter the carbon share test results (mass %). |
| Standard Method Used to Test Carbon Share | If Calculation Method 2 is used, enter standard method used to test carbon share. |
| Calculated CO2 Quantity Emission Factor | If Calculation Method 2 is used, enter calculated CO2 emission factor. |
| Calculated CO2 Quantity Emission Factor Units | If Calculation Method 2 is used, select unit of measure for the emission factor: metric tons CO2 per barrel, or metric tons CO2 per metric ton of product. |
| Density Test Results (metric tons/ barrel) | If Calculation Method 2 is used, enter density test results in units of metric tons per barrel. |
| Standard Method Used to Test Density | If Calculation Method 2 is used, enter standard method used to test density. |